Home > News > Content

Fiber Laser Marking Machine 's Common Problems And How To Solve Them

- Mar 21, 2018 -

Here our engineers would like to tell you something about how to solve the common problems of the laser marking machines.

Common problems and how to solve them:

1. Marking results are not clear

    First, check the software parameters are correct, check the power parameters are set in a reasonable range, for example, if the frequency is too high, there won't be light coming out. 

    If the parameters are set correctly, then check the laser power supply. The factory laser power supply suppose to be 24V, use a multimeter to test the laser power supply. If the power supply voltage is not correct, replace the 24V power supply.

 

2. Marking results are not correctly located

    Check the nearby sources of interference, the working environment should be far away from any kind of interference.

    Check if there is any loosening noise coming from the galvanometer (marking head). If it does have loosening noise, please detach the galvanometer and send it back to us for further inspection.

   机器拼图.JPG

Related News

Related Products

  • CO2 Laser Printing Machine Used Wood Rubber Engraving Machine Laser Marking Machine
  • Flexible CO2 Laser Marking System Marking For Plastic, Rubber, Woods
  • Fiber Laser Marking Machines Marking On The Jewelry
  • Ultraviolet Laser Marking Machine For Glasses, Textile, TFT, LCD Screen, Textile Products
  • dot pin marking machine tabel design efficient dot pin pneumatic marking machine for metal materials
  • B-730